Ener-Spray Industrial Solutions Ltd. was created from a diverse management team with an extensive knowledge in sprayed coatings and liners who have backgrounds ranging from working in the oil & gas industry to experience in the construction industry.

The dynamic team saw a need, specifically in Alberta, for cold weather coating application. Whether it be internal tank coatings, geotechnical foam injection or spray foam insulation and fire proofing, Ener-Spray Industrial Solutions has the skills and expertise to get the job done. In Alberta the winter months can be long, dark, and extremely cold, making it hard to complete many spray coating jobs. With the assistance of Ener-Spray Industrial Solutions, coating jobs can be completed in weather as cold as minus 20 degrees Celsius.

Industrial Service

Ecodur 201 Protective Coating
Ecodur is the primary plastic coating product used by Ener-Spray Industrial Solutions. This product is environmentally friendly, containing non-toxic, solvent free, VOC-free, and BPA-free ingredients. Ecodur is highly durable and has a Class A flame spread rating. This ‘bio-safe’ product is NSF 61 rated for potable water container use. It’s easily sprayed at varying temperatures, including cold weather, and is designed to have fast cure rates. Ecodur is the best choice for Internal tank coatings. It will outperform and out last conventional epoxy coatings that have been the industry norm for many years. Ecodur has a much wider application temperature window (-20C vs +4C) It’s adhesion strength is much higher than epoxy making the systems life cycle much longer. Ecodur’s high adhesion, high elongation and high tensile strength characteristics make it a very durable coating. Handling of tanks, pipes and coated structures can cause the traditional epoxy coating to crack, break off and fail. Ecodur will flex and bend and maintain adhesion making it the perfect coating for oil field structures that get moved around. Ecodur has a high chemical resistance and has been tested against most of the chemicals used in the petroleum industry and waste water industries. Contact a Ener-Spray Industrial representative to discuss your project needs.

Typical uses are the following:
  • ST

    Internal Steel Tanks

  • SC

    Secondary Containment (Concrete / Geotextile)

  • PC

    Internal Pipe Coatings

  • CT

    Internal Concrete Tanks

  • FT

    Frack Tanks

  • ST

    Sumps & Trenches

  • WS

    Water Storage

  • WT

    Water Treatment

  • WW

    Waste Water Treatment

  • RT

    Internal Rail Tank Car Coatings

Industrial Service

Internal Tank Coatings
Ener-Spray uses Ecodur as the main Industrial coating for Internal Tank Liners. It is the perfect solution for all kinds of products from potable water to oil and everything in between. Ecodur is engineered to withstand all kinds of environments including high heat, high pressure and all kinds of chemicals. Ener-Spray has the ability to spray both new and old bolted tanks used in the Oil & Gas industry. When steel tanks in the oilfield have been in service for many years they will require refurbishing at one point or another, instead of acquiring a new tank it is more economically feasible to sandblast and recoat existing tanks. Along with refurbishing, Ener-Spray also does many new construction coatings and has the ability to bridge chimes and flex with the tanks structure. From Potable water tanks to petroleum products such as oil and fuels Ener-Spray will find a solution.
  • OT

    Oil Tanks
    (400bbl – 150,00bbl+)

  • BT

    Brine Tanks

  • PW

    Potable Water Tanks

  • FT

    Frac Tanks

Industrial Service

Secondary Containment
Loose fit secondary containment repairs and new construction is another area where Ener-Spray excels. Ener-Spray’s plastic coatings can be applied to various surfaces for repairs such as HDPE, LLPE, PVC and clay liners.

Sprayed Liners for secondary containment can be done with Ecodur or Polyurea coatings. Our spray applied coatings are being used for many different containment needs from containment ponds, tank farms, under compressors and oil and gas pipelines. Our products have a high life expectancy, high abrasion resistance, fast application, wide temperature application range, zero VOC’s, high chemical compatibility and high UV resistance. The liners are typically sprayed over a geotextile matting and can be left exposed. No need for sand or gravel. We can also apply a non- slip surface. Rolls of geo matt can be sprayed at our shop and shipped to site. Seams will be sprayed on site and this process can save time and construction interruption.

  • TF

    Tanks / Tank Farms

  • PJ

    Wellheads & Pump Jacks

  • CP

    Containment Ponds

  • DD

    Drainage Ditches

  • ST

    Sumps & Trenches

  • CS

    Under Concrete Slabs

Industrial Service

Media Blasting
Ener-Spray can assist with a variety of media blasting such as sand blasting, shot blasting, and high pressure water cleaning.

Industrial Service

2 Pound Spray Foam Insulation
2 lb. medium-density foam is a spray-applied insulation, air barrier and vapor barrier that has the following benefits:
  • Highest R value of insulation materials
  • 100% adhesion to substrate
  • VOC’s below detection
  • Zero Ozone depleting
  • Fills in all gaps and voids making It the perfect solution to insulate complicated structures
  • Durable. Will flex and move with a structure. Increases rack and shear strength
  • Can be used on the interior or exterior of projects depending on application
  • Fire Resistant but may have to be covered with a thermal barrier

Ener-Spray has been involved with Sprayed polyurethane foam for over 15 years. We have the experience and crews to get any job done effectively, on time and on budget.

Applications include:
  • Sk

    Skids

  • Ta

    Tanks

  • CS

    Compressor Stations

  • Pi

    Pipelines

  • PB

    Portable Buildings

  • BG

    Below Grade Work